admin@plant-expert.com
2134 Lake Road Camden, NJ 08102

Plant Expert

CULTIVATION (INDOOR)
Home » Cultivation  »  CULTIVATION (INDOOR)
CULTIVATION (INDOOR)

I - Light transmittance. At the very beginning, you need to check that the space is not transmitting light. If the cannabis is to bloom well, we need to ensure that it has 12 hours of night and 12 hours of light. Without caring about it, we will make the hemp plant lower. You have to make sure that the light does not get inside, and the places where it can be secured with tape. If the cultivation area is not shaded, it can unfortunately destroy the entire crop. The grower must also take care to remove all male flowers at the right time. This is very important as it will ensure that all the flowers are not full of seeds at some point.

II - Hermetic. When plants are well protected and in bloom, they can produce beautiful flowers and all production gains momentum. Our plants will spread and smell stronger. For this to happen, they must be provided with the best possible conditions and a tight breeding place. There must be no cracks or holes in the growing area that could make the smell escape. When plants smell, you will probably get used to it after a while. Yet another important factor is the preparation of the security aspects that will make the climate fully under control. It is important that the plant growth is as good as possible and that the tallest plants are obtained. It is always worth preparing this place of cultivation in such a way that hermeticity will be 100% ensured.

III - Climate. If all the above-mentioned issues are sorted out, we can come to the most important one, i.e. preparing the entire space for cultivation. We create an atmosphere there that will make our plants grow beautifully and start blooming very quickly. During the entire cultivation and along the entire length, the climate must be maintained at the same level, therefore an important element will be a fan that can provide adequate air flow. Plants can become thicker and stronger when the same climate is distributed well throughout the entire crop. You can also always supplement such an installation with a thermostat, because in this simple way we will be able to ensure such conditions in which the temperature will remain at a similar level. When the temperature rises above, the fan starts working.

Let's take a short break and emphasize that the seeds and its genetics are important for indoor marijuana cultivation. Personally, I have many years of experience with various seed banks and in the end I opted for the Dutch Seeds Shop. Not only is their genetics great, the delivery time is incredibly fast and I would warmly recommend everyone to order cannabis seeds for indoor growing from them.

IV - Air humidity. If we want to regulate the air humidity, we need a special humidifier. It is not particularly expensive and it is definitely worth reaching for this solution. The advantage will be that they have built-in hardware that allows you to program them, which then controls the humidity itself. Certainly, well-adjusted equipment will guarantee better and faster plant growth, therefore it is worth reaching for it. If you manage to do this, you can make a decision to insulate the room well. Everyone can use the best way for themselves here. You also need to check if there are air inlets on one side. This is important as it will allow the plants to grow better. A carbon filter is also installed, which will be a good solution because it will limit the issues of strong, irritating odors. The next thing is to adjust the fan and here you have to try hard to choose a solution that will certainly work well. You need to calculate the power of the equipment in relation to the room where the cultivation will be. This is the best solution, because it will allow us to determine whether a given fan will actually work. In specific months, the fan may also work in different ways. Most often, in these winter months, the operation of the fan will not require such significant intensity. However, you have to remember that a fan is a piece of equipment that can make a lot of noise, so it seems better to look for a fan that won't make a lot of noise. You will never buy a fan that is too big. It can only be too small. It also makes no sense to keep the equipment, which will work at higher speed. Therefore, it is really better to buy more powerful equipment that will work at a lower speed, then it will not generate such a lot of noise, so it will be beneficial for us. The air stream from the fan is supposed to make the plant receive a stream of air favorable for its growth.

V - square meter. But in the end, you have to get down to business and thus build a place for cultivation. A square meter is really enough. Everyone will find so much at home, be it in the basement or in the attic. We need elements that will allow us to prepare a screen space around the crop. It must be assumed that we use the space in the room, so it should be fenced off in an appropriate way, so as not to lead to a situation that there will be an unpleasant smell everywhere, which will appear when the plants start to bloom. The advantage of the screen is also the fact that the lamp's light is well used. It is reflected and the plant receives as much light as it actually needs. Keeping light above the crop in this way will indeed be important. If you cover the elements around your crop with reflective white, this will be the best and seems to be the cheapest way to increase the yield of your crops. There is no cheaper solution. Mylar is a material that is currently very good at reflecting light. The Mylar needs to be hung upright so that it can get the best out of it. The construction of the screen usually does not take much time. It is enough to properly cut the wooden elements to good lengths. Then connect everything to the height of the ceiling, so that the entire level of the crop is covered. If we have a tio screwdriver, the combination of these various wooden elements should not be a big problem, so we will handle it easily. If there are plastic elements, then after making such a solution, we can safely remove these excessive elements, so you can cut it off even after assembly. This simple method allows you to prepare the first reflective screen. Then you need to add other elements similarly prepared as the previous ones. All these elements must be efficiently combined with each other, obtaining the best possible efficient connection of all screens to each other, which will be made in such a way that they will also contain a material that will, of course, be responsible for the reflection of light. These screens must of course be well connected with each other, but we do this connection only when all the screens are ready. Finally, you need to prepare one more separate screen, which will be the entrance door to our cultivation. Here you need to prepare an element that will close the whole box that will be ready for cultivation. The design of this screen must be carefully considered, as the point is that it can be easily moved away to control your plants. Preparation of a well-constructed box will be a key element, which can be seen when harvesting plants, because light reflects freely and it really gives a good effect. Ultimately, this also ensures that the smell from the plants is retained inside. With the use of an appropriate filter, if only one is well mounted, it will be possible to guarantee the removal of this unpleasant odor to the outside without much problem. The design of this screen must be carefully considered as the point is that it can be easily moved aside to control your plants. Preparation of a well-constructed box will be a key element, which can be seen when harvesting plants, because light reflects freely and it really gives a good effect. Ultimately, this also ensures that the smell from the plants is retained inside. With the use of an appropriate filter, if only one will be well mounted, it will be possible to guarantee the removal of this unpleasant odor to the outside without much problem. The design of this screen must be carefully considered, as the point is that it can be easily moved aside to control your plants. Preparation of a well-constructed box will be a key element, which can be seen when harvesting plants, because light reflects freely and it really gives a good effect. Ultimately, this also ensures that the smell from the plants is retained inside. With the use of an appropriate filter, if only one will be well mounted, it will be possible to guarantee the removal of this unpleasant odor to the outside without much problem. the light reflects freely and it really gives a good effect. Ultimately, this also ensures that the smell from the plants is retained inside. With the use of an appropriate filter, if only one will be well mounted, it will be possible to guarantee the removal of this unpleasant odor to the outside without much problem. because light reflects freely and it really gives a good effect. Ultimately, this also ensures that the smell from the plants is retained inside. With the use of an appropriate filter, if only one is well mounted, it will be possible to guarantee the removal of this unpleasant odor to the outside without much problem.

VI - A base for pots. The room where the cultivation is to be located must be easy to clean, so you need to prepare a base for a pot with plants. We are building a frame here, which is a little over a meter and a height of about 15 cm. It is lined with plastic and checking for holes. The advantage of this solution is that we have a clean crop and at the same time protect it against diseases. Rubbish and all other items remain on this basis. When the files are finished, it should all be added and deleted. And so in a short time you will be able to ensure a clean room. If you additionally want to rinse the harvest, make sure that the pot is properly secured. Clean water is, of course, some nutrients for the plant, so it is worth controlling the use of this type of solutions here. Some even rinse them once every two weeks to ensure healthy plants. This pot support is important in order to allow the plants to be flushed without the mess created by escaping water. If we grow in soil, such a base will also be useful because it will be possible to leave water in the base and then the plant will adjust the moment when it takes up nutrients. The base will thus become an irrigation system that can actually become an essential element. As soon as we manage to take care of all these elements, we keep a well-prepared cultivation room. Some even rinse them once every two weeks to ensure healthy plants. This pot support is important in order to allow the plants to be flushed without the mess created by escaping water. If we grow in soil, such a base will also be useful because it will be possible to leave water in the base and then the plant will adjust the moment when it takes up nutrients. The base will thus become an irrigation system that can actually become an essential element. As soon as we manage to take care of all these elements, we keep a well-prepared cultivation room. Some even rinse them once every two weeks to ensure healthy plants. This pot support is important in order to allow the plants to be flushed without the mess created by escaping water. If we grow in soil, such a base will also be useful because it will be possible to leave water in the base and then the plant will adjust the moment when it takes up nutrients. The base will thus become an irrigation system that can actually become an essential element. As soon as we manage to take care of all these elements, we keep a well-prepared cultivation room. If we grow in soil, such a base will also be useful because it will be possible to leave water in the base and then the plant will adjust the moment when it takes up nutrients. The base will thus become an irrigation system that can actually become an essential element. As soon as we manage to take care of all these elements, we keep a well-prepared cultivation room. If we grow in soil, such a base will also be useful because it will be possible to leave water in the base and then the plant will adjust the moment when it takes up nutrients. The base will thus become an irrigation system that can actually become an essential element. As soon as we manage to take care of all these elements, we keep a well-prepared cultivation room.